Pressure transmitters are the most commonly used sensors in industrial practice, mainly including gauge pressure, absolute pressure, differential pressure, etc. Gauge pressure refers to the pressure based on the atmosphere, which is less than or greater than atmospheric pressure; Absolute pressure refers to being higher than absolute pressure based on the zero position of absolute pressure; Differential pressure refers to the difference between two pressures. According to the type of sensor, it can generally be divided into capacitive pressure transmitters, diffusion silicon pressure transmitters, and monocrystalline silicon pressure transmitters. In general, a pressure transmitter is mainly composed of three parts: a pressure measuring element sensor (also known as a pressure sensor), a measurement circuit, and process connectors. It can convert the physical pressure parameters of gases, liquids, etc. sensed by pressure sensors into standard electrical signals (such as 4-20mA, etc.), which are transmitted to secondary instruments such as indicator alarms, recorders, regulators, etc. for measurement, indication, process adjustment, and control.
Widely used, it can measure oil, water, various chemical raw materials or gases, and has certain anti-corrosion and high-temperature resistance capabilities; High accuracy, high stability, good linearity, with a conventional accuracy of 0.5% FS and special customized accuracies of 0.25% and 0.1%; The transmitter has a small overall volume, light weight, easy installation, debugging, and use, and is optional
Diversified installation methods, including various specifications of threaded installation, various sizes of flange installation, sanitary chuck installation, etc;
The exquisite transmitter adopts a stainless steel fully enclosed shell with good waterproof performance. The industrial 2088 or 3051 models both use explosion-proof aluminum shell meter heads, which are better suited for various application scenarios; The pressure sensor directly senses the pressure of the measured medium, which is not affected by foaming or sedimentation, has no mechanical movable parts, and requires less maintenance; Superb measurement performance, suitable for pressure, differential pressure, liquid level, and flow measurement; Standard 4-20mA, digital signal with HART protocol and RS485 communication, remote control and centralized signal acquisition;
