News

Application Scope And Characteristics Of Liquid Level Meter

Apr 25, 2024 Leave a message

Glass tube liquid level meter has the advantages of simple structure, economical and practical, easy installation, reliable operation and long service life.

 

However, the disadvantages are also obvious: the inner surface is easy to be contaminated, which makes reading difficult and inconvenient for remote transmission and adjustment.

 

As a basic liquid level indicator, this product is widely used in the measurement and monitoring of liquid levels in the simplest liquid level measurement occasions and large-scale engineering projects with low automation.

 

The installation of glass tube liquid level meter should follow the following steps:

(1) Before installing the liquid level meter, please carefully disassemble the box to avoid breaking the glass due to the nails on the box. Then do not knock the glass tube liquid level meter body too hard during installation. Do not have excessive vibration.

(2) After the liquid level meter is installed, when the medium temperature is very high, do not open the valve immediately. It should be preheated for 20-30 minutes. After the glass tube has a certain temperature, slowly open the valve.

Valve opening procedure: first slowly open the upper valve, then slowly open the lower valve, so that the measured medium slowly enters the glass tube.

(3) When using the liquid level meter, the dirt on the inner and outer walls of the glass tube should be cleaned regularly to keep the liquid level display clear. Cleaning procedure: First close the upper and lower valves connected to the container, open the drain valve, drain the residual liquid in the glass tube, use appropriate cleaning agents or use a long-handled brush to remove dirt on the inner wall of the tube.

 

Send Inquiry