News

Development Direction Of Transmitters

Jun 05, 2024 Leave a message

No matter how the conventional transmitter improves its accuracy, it still cannot overcome its inherent working characteristics, and errors are inevitable. The rapid development of computer technology provides broad prospects for the research and development and production of high-performance transmitters. The single-chip AC sampling transmitter has a high cost-effectiveness, high accuracy, stable and reliable operation, and does not need to be adjusted frequently.


The single-chip AC sampling transmitter has the following characteristics.
(1) Sampling period and sampling timing
1) Selection of sampling period When the high-order harmonic component in the power grid is not large, the sampling period can be selected from low-rate methods such as 8th and 12th, which has low requirements for the single-chip microcomputer and its equipment, and the data processing is also simple; if the high-order harmonic component in the power grid is large, the sampling rate must be increased at this time.
2) Selection of sampling timing Especially in the low-rate sampling method, if the sampling timing happens to be at the peak and valley point of the high-order harmonic, it will have a great impact on the accuracy. Therefore, within the scope allowed by the device and technology, the sampling frequency should be increased as much as possible, so as to suppress the interference in the power grid.


(2) Nonlinear compensation of core The single-chip AC sampling transmitter can realize segmented nonlinear compensation of the core. According to the accuracy requirements and the characteristics of the core itself, there is a corresponding compensation curve for each core, and segmented compensation can be realized.


(3) Compensation of hysteresis angle of core Since the single-chip microcomputer has a storage function, the hysteresis angle compensation of the core becomes very simple. After measuring the hysteresis angle of the core, the hysteresis angle of each core is stored in the single-chip microcomputer and phase shifted by the program. This compensation can be completely idealized.

 

Send Inquiry