News

Factors Affecting The Transmitter

May 15, 2024 Leave a message

There are many factors that affect the accuracy of the transmitter in the circuit, the main ones are as follows.
(1) The influence of nonlinear elements Conventional voltage and current transmitters are mostly AC converters (small mutual inductors). The secondary power frequency AC signal is rectified, filtered, and stabilized to obtain the final DC signal. Since the rectifier diode is a nonlinear device, its voltage and current curves have nonlinear characteristics.


(2) The influence of the transmitter core Conventional transmitters use iron core materials as magnetic conductive media. On the one hand, the nonlinear characteristics of ferromagnetic materials (the starting area and saturation area of ​​the magnetization line) are not an ideal linear transmission relationship, so it will inevitably affect the accuracy of the transmitter. On the other hand, due to the hysteresis of ferromagnetic materials, the iron core will also affect the accuracy of the transmitter. Generally, within the power frequency range, the hysteresis angle of conventional silicon steel sheets varies within the range of 0° to 15°. The existence of this hysteresis angle is equivalent to increasing the reactive power component. Since conventional power transmitters calculate power by multiplying voltage and current signals, this hysteresis angle will also affect the accuracy of the power transmitter.


(3) The influence of operational amplifiers Conventional power transmitters are mostly composed of operational amplifiers. Temperature has a great influence on the operation of operational amplifiers. When the temperature changes, the "zero" point drifts, making the operating point unstable, which directly affects the accuracy and reliability of the transmitter.


(4) The influence of transmitter setting value selection Although the setting value of the transmitter is as close to the full value as possible when selected, the transmitter often cannot work in the linear region in actual use, resulting in errors.


(5) Error caused by impedance mismatch


(6) The influence of system imbalance Conventional transmitters generally assume that the system is balanced when calculating power, but in fact it is unbalanced. This imbalance of the system often affects the accuracy of the transmitter.

 

Send Inquiry