Products Description
External clamp ultrasonic flowmeter refers to a device that measures the flow rate of fluid inside a pipeline by clamping the sensor onto the outer surface of the pipeline. By measuring the ultrasonic signal generated by the fluid passing through the pipeline wall, the flow rate can be calculated. Due to the fact that the external clamp ultrasonic flowmeter does not require interrupting the pipeline, its installation and maintenance are very convenient, and it will not affect the fluid flow and quality inside the pipeline. Therefore, it is widely used in various industrial and civil occasions.
It can be divided into the following types based on the form of the host:
Handheld
◆ Measurement accuracy: better than 1%;
◆ Repeatability: better than 0.2%;
◆ Working power supply: 90-230VAC (built-in nickel hydrogen rechargeable battery, can work continuously for 12 hours when fully charged);
◆ Installation method: External binding installation, easy to operate and convenient;
◆ Display: Display instantaneous flow rate, flow rate, cumulative flow rate, signal status, etc. on the same screen with 4 lines of Chinese characters;
◆ Signal output: Non isolated RS232 (FUJI extension protocol), 1 isolated OCT output;
◆ Other functions: The built-in data recorder can record time, cumulative flow, signal status, working time, and other standard data interfaces RS232 for network detection or export of recorded data, self diagnosis, and prompt whether the current working status is normal;
Portable
◆ Measurement accuracy: better than 1%;
◆ Repeatability: better than 0.2%;
◆ Working power supply: 220VAC (standard), 110VAC (optional); Measurement cycle: 550ms (2 times per second, collecting 128 sets of data per cycle);
◆ Battery: The built-in nickel hydrogen rechargeable battery can work continuously for 24 hours;
◆ Installation method: external binding installation;
◆ Display: Two lines of Chinese characters displayed on the same screen (instantaneous flow, cumulative flow, signal status, etc.); Signal output: isolated RS485;
◆ Communication protocol: MODBUS protocol, FUJI extension protocol, and compatible with communication protocols of similar products from other domestic manufacturers;
◆ Print output: Built in thermal integrated printer for real-time or timed printing;
◆ Other functions: Self diagnosis, prompt whether the current working state is normal;
Fixed type
◆ Measurement accuracy: better than 1%;
◆ Maximum flow rate: 64m/s (flow rate resolution of 0.001m/s)
◆ Display: 2 * 10 Chinese backlit LCD display of instantaneous flow rate, positive, negative, net cumulative flow rate, flow rate, etc
◆ Operation: 4 * 4 touch pad (F4 host magnetic 4 buttons) Operation
◆ Signal output: 1 channel of isolated RS485 output; 1 channel 4-20mA or 0-20mA output; 1 isolation OCT (programmable pulse width between 6-1000ms, default 200ms); 1 relay output (pulse width 200ms);
◆ Communication protocols: MODBUS protocol, M-BUS protocol, FUJI extension protocol, and compatible with communication protocols of similar products from other domestic manufacturers;
◆ Protection level: sensor IP68, F4 host IP68, other hosts IP65;
◆ Explosion proof level: Exd Ⅱ BT4 (TDS-100F2 type)

Technical Parameters
|
Sensor Name |
Standard S1 type |
Standard M1 type |
Standard L1 type |
High temperature S1H type |
High temperature M1H type |
|
Applicable pipe diameter |
DN15~DN100 |
DN50~DN700 |
DN300~DN6000 |
DN15~DN100 |
DN50~DN700 |
|
Texture of material |
ABS |
Special high-temperature materials |
|||
|
Working frequency |
1MHZ |
||||
|
Installation method |
V(N, W) |
V, Z |
Z |
V(N, Z) |
V, Z |
|
Calibration |
Complete machine pairing calibration |
||||
|
Magnetic |
have |
no |
|||
|
Applicable temperature |
0-70℃ |
0-160℃ |
|||
|
Protection level |
IP65 |
||||
|
Media type |
A single, uniform, and stable liquid that can transmit ultrasonic waves, such as water, seawater, sewage, alcohol, and various oils |
||||
|
Medium turbidity |
≤ 20000ppm with small bubble volume |
||||
|
Applicable pipe materials |
Carbon steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other uniformly dense pipelines are allowed to have lining |
||||
|
Pipeline lining material |
Epoxy asphalt, rubber, mortar, polypropylene, polystyrene, bakelite, polytetrafluoroethylene, etc |
||||
|
Signal cable |
Standard configuration: 5 meters * 2, optional with 10 meters * 2 or 15 meters * 2 |
||||








Hot Tags: clamp-on ultrasonic flow meter, China clamp-on ultrasonic flow meter manufacturers, suppliers, factory, Hand Held Ultrasonic Flow Meter, Ultrasonic Water Flow Meter, External Ultrasonic Flow Meter, Fixed Ultrasonic Flow Meter, Ultrasonic Flow Meter Clamp On

